Datasheet

PAGE03 - 32
TEST INSTRUMENTS
www.gossenmetrawatt.com
E-CLIP 1 / E-CLIP 2 Clamp Meter and Generator Clamp
E-Clip 1
E-Clip 2
E-CLIP 1
Clamp meter: 1MA ... 1200A, 1MA / A,
40HZ ... 5KHZ, 52MM DIA.
•
Measuring range: 1 mA ... 1200 A
•
Measuring category: 600 V CAT III
•
Max. cable diameter: 52 mm
•
Transformation ratio: 1000 A / 1 A
•
Frequency range: 40 Hz ... 5 kHz
•
Output signal: 1 μA ... 1.2 A
INCLUDED WITH THE E-CLIP 1:
•
Clamp meter with connector cable (1.5m) and
laboratory safety plug
E--CLIP 2
Generator clamp, 0.2 ... 1200A, 1mA / A, 0Hz ...
5kHz, 52mm dia., same as E-Clip 1, except:
•
Measuring range: 0.2 A ... 1200 A
•
Output signal: 0.2 mA ... 1.2 A
INCLUDED WITH THE E-CLIP 2:
•
Generator clamp with laboratory safety plug inputs
Type Article
E-Clip 1 Z591A
E-Clip 2 Z591B
PHASECOP 2 Phase Sequence Indicator
Phase Sequence Indicator with LEDs and Contact
Protected Plugs
Instrument for determining direction of rotation and
phase sequence in three-phase systems Phase se-
quence is acquired by means of an electronic circuit.
The direction of rotation is indicated by one of two
directional arrows, each of which is equipped with
an LED. An LED is provided for each phase which
indicates whether or not the phase conductor is live.
The device can be used in all low-voltage systems.
FEATURES:
•
Complies with DIN VDE 0413-7 / EN 61557-7,
indicates direction of rotation and phase
•
Nominal range of use: 90 ... 660V / 45 ... 1000Hz
•
Measuring category: 600 V CAT III
INCLUDED WITH THE PHASECOP 2:
•
Phase sequence indicator
•
3 permanently connected measurement cables with
contact-protected plugs
•
3 plug-on test probes
•
1 alligator clip
OPTIONAL ACCESSORIES:
•
F801 ever-ready case (GTY3172070P01)
Type Article
PhaseCop 2 GTM5202000R0001
CLAMP METERS AND GENERATOR CLAMPS / PHASE SEQUENCE INDICATORS