Datasheet

GMC-I Messtechnik GmbH 3
METRISO PRIME
High-Voltage Insulation Tester
for battery or hand crank generator operation
Electrical Safety
Protection Class II
Test Voltage 8.5 kV~
Measuring Category
1000 V CAT II, 600 V CAT III, 300 V CAT IV
Nominal Voltage 1000 V
Open Circuit Voltage 5000 V
Contamination Degree 2
Using the test probes
Electromagnetic Compatibility (EMC)
Product standard DIN EN 61326-1:2006
Mechanical Design
Dimensions W x D x H:
290 mm x 250 mm x 140 mm
Weight 3.4 kg with batteries
Protection IP 52
Extract from table on the meaning of IP codes
Equipment METRISO PRIME (battery operation)
1 high-voltage insulation tester with permanently
connected measurement cables and test prods,
2 crocodile clips (5 kV version)
and plug-in battery module including batteries
1 carrying strap
1 operating instructions
Equipment METRISO PRIME
(hand crank generator operation)
1 high-voltage insulation tester with permanently
connected measurement cables and test prods,
2 crocodile clips (5 kV version)
and hand crank generator
1 carrying strap
1 operating instructions
Maximum rated voltage 300 V 600 V 1000 V 5000 V
Measuring category
CAT IV CAT III CAT II —
With safety cap attached
——
Without safety cap
— — 
Interference Emission Class
EN 55022 B
Interference Immunity Test Value Performance Feature
EN 61000-4-2 Contact/Air - 4 kV/8 kV B
EN 61000-4-3 10 V/m B
IP XY
(1
st
digit X)
Protection against
foreign object entry
IP XY
(2
nd
digit Y)
Protection against the
penetration of water
0 not protected 0 not protected
1  50.0 mm dia. 1 vertically falling drops
2
 12.5 mm dia.
2 vertically falling drops
with enclosure tilted 15
3  2.5 mm dia. 3 spraying water
4  1.0 mm dia. 4 splashing water
5 dust protected 5 water jets