Operation Manual

GMC-I Messtechnik GmbH 59
An error has occurred while saving data to memory. Save data to a PC and then clear the memory.
See text at the display. Press the START key to repair.
Memory in no longer able to save new measurement data. Save data to a PC and then clear the memory.
See text at the display. Transmit data to a PC or print them out, and then delete
DUTs which are no longer necessary, or clear the entire
memory.
No data have yet been saved to this data record.
Printing is not possible. Check connections at the printer and make sure paper is
available.
Check the printer for possible errors.
Data are being transferred to the printer. The printer may wait until data
transmission has been entirely completed before it starts printing.
A filled file cabinet indicates that measurement data have already been
saved to memory for the selected DUT.
The data record has been deleted for a DUT.
The printer is not working. Check the data record.
The printer is not working. Check the connection between the printer and the MERISO
PRIME+.
Then press the START key.
The printer is working correctly. Turn the selector switch in order to abort the print-out.
Displays and Error Messages Meaning / Cause Remedy