Operation Manual

GMC-I Messtechnik GmbH 5
PC Program WinProfi for communication with MERISO PRIME+
The free PC starter software WinProfi is used for communication
with your MERISO PRIME+ test instrument. WinProfi* is available
on our homepage with the following content and functions:
• up-to-date test instrument software
– for loading a different language
for the user interface
– for loading an updated software version
• Transmission of measurement data from the test instrument to
the PC
• preparation and modification of templates for test reports at the
PC and transmission of the templates to the test instrument
• preparation, printout and filing of test reports at the PC
The following interface cables and/or converters are required for
communication between test instrument and PC:
– Z3241 RS232 (tester*) – RS232 (PC)
– RS232-USB Converter (Z501L) RS232 (tester*) – USB (PC)
* not possible via the RS232 terminal of a connected SECUTEST PSI
Up-to-date PC software (free of charge starter or demo software
for data management, report and list generation) is available from
our homepage for download.
* WinProfi is currently applicable up to Windows 7 (32 Bit)