Operation Manual

4 GMC-I Messtechnik GmbH
Retrofitting with a high-voltage module (feature B1 or B2) can only
be performed by GMC-I Service GmbH.
The high-voltage module is
then controlled by MERISO PRIME+.
1 Inlet plug for high-voltage module supply power with fuse insert
2 Key switch for prevention of unauthorized start-up
3 Connection for external signal lamps (see chapter 3.2.3 on page 18)
4 High-voltage module ready for operation when signal lamp is lit up green
5 High-voltage module ready to switch on when signal lamp is lit up red
Caution, danger!
6 Permanently connected measurement cables
7Trigger (switch)
As opposed to the high-voltage pistol without switch, the high-voltage
switching pistol is identified with a red clamping ring on the connector cable
underneath the handle.
8 Recessed safety test probe
0
I
!
5
4
1
2
3
PROFITEST 204 HP/HV High-Voltage Module,
Connection Panel
6
8
7
High-Voltage Switching Pistol