Operation Manual

26 GMC-I Messtechnik GmbH
3.7.5 Downloading a Language or a Software Update
If you require a language other than one of those included with
the instrument, it can be downloaded with the help of WinProfi*
PC software. The data file with the desired language is transmit-
ted to the test instrument via the serial interface. The previously
installed language is overwritten.
Software updates can be downloaded with the help of the same
program, regardless of the currently installed language.
Note
You can use WinProfi software at the PC side (included
with the MERISO PRIME+) to download a language to
the test instrument. This software includes all of the func-
tions required for communications between the MERISO
PRIME+ and the PC. A description of the program is
included in the online user’s manual which can be
accessed from WinProfi.
* WinProfi is currently applicable up to Windows 7 (32 Bit)
A Installing WinProfi to the PC and Starting the Program
Ð Download the WinProfi software from our homepage:
http://www.gossenmetrawatt.com
( → Products → Software → Software for Testers → WinProfi)
Ð Unzip the zip file „winprofi.zip“.
Ð Install the software on your PC by executing file
Setup_WinProfi_Vx.xx.exe.
Ð Select the desired language for the WinProfi software and for
the user interface of the test instrument.
Ð Follow the instructions which appear at the monitor.
The program is added to your start menu after installation.
Displaying and printing out the online user’s manual
(contains information concerning the software which is not
included in these operating instructions).