Operation Manual

22 GMC-I Messtechnik GmbH

3.7 Setup

Various basic settings can be selected for the test instrument with

the selector switch in the SETUP position.

SETUP

Select Parameter

Open Menu for Entering Parameters

All setting and changes entered to the menu accessed in the

SETUP switch position are saved to memory automatically, and

are retained after disconnecting the device from mains power.

Exit Function

Restoring default setting – standard values

Switch off the test instrument: switch position OFF.

Then press and hold the MENU and i/STORE keys simultane-

ously, and turn the function key to TEST position. The standard

values of the default setting are thus restored.

3.7.1 Adjusting Contrast and LCD Illumination

Contrast can be increased or decreased with this function.

LCD illumination can be switched on or off as well.

SETUP

Select Display Contrast

Open Entry Menu

Adjust Contrast

START

Switch Illumination On or Off *

* Background illumination is switched off automatically after approximately 2.5 min-

utes if none of the keys are activated during this time. Each time a key is activated,

background illumination is extended for an additional 2.5 minutes.