Datasheet

Edited in Germany • Subject to change without notice • PDF version available on the Internet
METRISO INTRO, BASE, TECH
High-Precision
Insulation, Low Resistance and Voltage Measurement Instrument
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg, Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gossenmetrawatt.com
Operating Case METRISO G (Z550C)
Order Information
For additional information regarding accessories please refer to
• www.gossenmetrawatt.com
Description Type Article number
Insulation measuring instrument for DIN VDE 0100, ÖVE-EN 1 (Austria) and NIV/NIN SEV
1000 (Switzerland), complies with IEC/EN 61 557/VDE 0413, parts 1, 2, 4 and 10
Test voltages from 50 V to 1000 V,
voltage measurement to 1000 V,
including low-resistance measure-
ment METRISO TECH M550P
METRISO TECH
inclusive Test Probe
for Remote Triggering (Z550A) and
Operating Case (Z550C)
METRISO TECH-Set M551P
Test voltages from 50 V to 500 V,
voltage measurement to 500 V,
including low-resistance measure-
ment METRISO BASE M550O
METRISO BASE
inclusive Test Probe
for Remote Triggering (Z550A) and
Operating Case (Z550C)
METRISO BASE-Set M551O
Test voltages from 250 V to 1000 V,
voltage measurement to 1000 V,
including low-resistance measure-
ment METRISO INTRO M550N
METRISO INTRO
inclusive Test Probe
for Remote Triggering (Z550A) and
Operating Case (Z550C)
METRISO INTRO-Set M551N
Accessories (not included)
Calibration adapter for testing the accu-
racy of instruments used for measuring
insulation resistance and low-resistance
for test voltages of up to 1000 V (per
VDE 0413, parts 1, 2 and 4).
ISO calibrator 1 M662A
Cable set consisting of measure-
ment cable and shielded high-resis-
tance measurement cable for mea-
surements in the G range KS-C Z541F
Alligator
clips (1 pair) for KS17-4
and KS-C
KY-95-3 Z110J
Cable set consisting of a 4 m long
extension cable with a permanently
attached test probe at one end and a
contact protected socket at the other
end, and 2 alligator clips which can
be plugged onto the test probe KS24 GTZ3201000R0001
Triangular probe for floor measure-
ments per EN 1081, DIN VDE 0100-
600 (Standing-Surface Insulation) 1081 probe GTZ3196000R0001
Telescoping rod for PE measurement Telearm 1 GTZ3232000R0001
Reel with 25 m measurement cable TR25 reel GTZ3303000R0001
Drum with 50 m measurement cable TR50 drum GTY1040014E34
Test probe with START/STOP key and
an additional key for illuminating the
measuring point, including shielded
cable and test probe holder for car-
rying belt
Test Probe
for Remote Triggering
METRISO G Z550A
Magnetic Measuring contacts with
contact protection – Set with mag-
netic holder, measurement contacts
5,5 mm in diameter insulated,
CAT III 1.000 V / 4 A, temperature
between –10 °C and 60 °C, under
standard conditions and flat-head
screws holding force 1.200 g verti-
cal to contact area;
measuring instrument connector:
angled multilam plug according (for
METRISO G series)
Set 1 – Magnetic Mea-
suring Tips Z502U
Operating case for
METRISO INTRO /
BASE / TECH / PRO / XTRA with
outer bag for measuring leads
Operating Case
METRISO G Z550C
Description Type Article number