Operation Manual

Edited in Germany Subject to change without notice  A pdf version is available on the Internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Telefon[phone]
Telefax [phone]
E-Mail [e-mail]
www.gossenmetrawatt.com
14 Repair and Replacement Parts Service
Calibration Center* and Rental Instruments Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Strasse 20
90471 Nürnberg • Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
www.gmci-service.com
This address is for Germany only.
Abroad, our representatives or establishments are at your disposal.
* DAkkS Calibration Laboratory for Electrical Quantities
D-K-15080-01-01
accredited per DIN EN ISO/IEC 17025:2005
Accredited measured quantities: direct voltage, direct current values, DC
resistance, alternating voltage, alternating current values, AC active power, AC
apparent power, DC power, capacitance, frequency, temperature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutsche Akkredi-
tierungsstelle GmbH (German accreditation body) in accordance with
DIN EN ISO/IEC 17025:2005 by under registration number
D-K-15080-01-01.
We offer a complete range of expertise in the field of metrology: from test
reports and proprietary calibration certificates right on up to DAkkS calibration
certificates.
Our spectrum of offerings is rounded out with free test equipment manage-
ment. An on-site DAkkS calibration station is an integral part of our service
department. If errors are discovered during calibration, our specialized
personnel are capable of completing repairs using original replacement
parts. As a full service calibration laboratory, we can calibrate instruments
from other manufacturers as well.
15 Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline
Phone: [phone]
Fax: [phone]
E-Mail [e-mail]