Operation Manual

18 GMC-I Messtechnik GmbH

6.3.3 Delete All Memory Addresses – Data Function

Up to 250 data records can be stored to memory. The memory is full

when the bar graph to the right of “MEMORY:” is entirely filled in. The entire

memory, i.e. all data records from all memory addresses, can be deleted

at once. We recommend uploading and saving your data to a PC before

deletion.

Ð Select Data.

Ð Enter memory address “000”. After acknowledgement by pressing

button START (press at center) a safety request appears.

Ð By simultaneously activating O and K all data that have been saved

are deleted from memory. The bar graph to the right of the parameter

„MEMORY:“ is empty. To the left, memory address „001“ is displayed.

New data can now be entered for the first address, or the

database can be exited (press  or START 9 times).

If the above message appears upon switching on the test instrument, all

data can be saved to a PC before finally deleting the database in order to

rectify the error.

6.4 Print Function

Functions the symbols of which appear in gray or are displayed only in a

faint raster screen, will not be available until after the next software

update.