Operation Manual

GMC-I Messtechnik GmbH 15
6 Database Functions
The displayed measurement data for each measurement can be saved to
an internal database, with or without a comment. A data record must be
created and allocated to a specific memory address in order to be able to
assign the individual measurement values to different buildings, distribu-
tion cabinets and measuring circuits.
6.1 Creating a Data Record – Data Function
Ð Press the Data key.
Ð First create the desired memory address with the help of the softkeys.
After acknowledging with the START key (press at center), the cursor
appears at the first data entry position (BUILDING).
Ð With the help of the softkeys, entries can be made to the BUILDING,
DISTRIBUTOR CABINET, RCD No. and CIRCUIT fields one after the other, and
a designation can be entered for the electrical circuit.
Entering Data:
Display the desired alphanumeric character by pressing the or
the key, and then select the character with the corresponding
softkey.
Control characters can be entered in the same way and have the fol-
lowing meanings:
 Move cursor to the left (without deleting data)
 Move cursor to the right (without deleting data)
 Same function as the START key
After each character is selected, the cursor moves one position to the
right. If  or the START key is activated (press at center), the cursor
moves to the next entry field. After the fields BUILDING, DISTRIBUTOR
CABINET, RCD No. and CIRCUIT have been completed, and after acknowl-
edgement has been confirmed with the  softkey, the data fields are
displayed as inverse images. After the  softkey has been activated
once again, a designation for the selected electrical circuit can be en-
tered.
Note
+
These entries are required by the PC software in order to enter
measurement values into the database, and to generate reports
with this information automatically.