Datasheet

GMC-I Messtechnik GmbH 5
• Make certain that the measurement cables are in flawless condition,
e.g. no damage to insulation, no interruptions in cables or plugs
etc.
For the application of measuring cables see chapter 8.2.
• No measurements may be performed with this instrument in elec-
trical circuits with corona discharge (high voltage).
• Special care is required when measurements are made in HF elec-
trical circuits. Dangerous pulsating voltages may be present.
• Measurements under moist ambient conditions are not permitted.
• Be absolutely certain that the measuring ranges are not over-
loaded beyond their allowable capacities. Limit values can be
found in the “Measuring Ranges” table in chapter 5 „Technical
Data“.
Meaning of symbols on the instrument
Warning concerning a point of danger
(Attention: observe documentation!)
Earth
Continuous doubled or reinforced insulation
CAT II / III Measurement category II 600 V / III 300 V device
Indicates CE conformity
fuse
This device and the inserted (rechargeable) batteries may not be
disposed of with the trash. For further details on the WEEE mark-
ing, please refer to our website www.gossenmetrawatt.de and
enter search key ’WEEE’.
!