Datasheet

GMC-I Messtechnik GmbH 27
During recalibration* in an accredited calibration laboratory
(DIN EN ISO/IEC 17025) the deviations of your instrument in relation to
traceable standards are measured and documented. The deviations
determined in the process are used for correction of the readings dur-
ing subsequent application.
We are pleased to perform DKD or factory calibrations for you in our
calibration laboratory. Please visit our website at
www.gossenmetrawatt.com ( Services  DKD Calibration Center or
 FAQs  Calibration questions and answers).
By having your measuring instrument calibrated regularly, you fulfill the
requirements of a quality management system per DIN EN ISO 9001.
8 Accessories
8.1 General
The extensive accessories available for our measuring instruments are
checked for compliance with currently valid safety regulations at regu-
lar intervals, and are expanded as required for new applications. Cur-
rently up-to-date accessories which are suitable for your measuring
instrument are listed at the following web address along with photo,
order number, description and, depending upon the scope of the
respective accessory, data sheet and operating instructions:
www.gossenmetrawatt.de ( Products  Measuring Technology –
Portable  MultimetersAccessories).
* Verification of specifications or adjustment services are not part of the calibration. For prod-
ucts from our factory, however, any necessary adjustment is frequently performed and the
observance of the relevant specification is confirmed.