Datasheet

12 GMC-I Messtechnik GmbH

4.4.1 DC and AC Currents up to 1 A (Direct Connection)

Ð Disconnect the

power supply to the

measuring circuit

and/or power con-

sumer (R

), and dis-

charge all

capacitors, if avail-

able.

Ð Set the range switch

to position

1/10 A or

1/10 A~.

Ð Interrupt the mea-

suring circuit and

safely connect the

measuring leads

(without transient resistor!) in series with the power consumer R

With DC current note the polarity!

Ð Set switch to position „ON“.

Ð Reconnect the power supply to the measuring circuit.

Ð Work down to lower current measuring ranges until optimum indica-

tion is obtained. Switching over does not interrupt the measuring

circuit.

Ð Read the measured value on the V, A scale.

– / ~ + / ~