Datasheet

GOSSEN-METRAWATT GMBH 3
METRAPHASE 1
Phase Sequence Indicator
Accessories (not included as standard equipment)
METRASTART 1 (article no. M620B)
The meter start-up tester – double insulated coil cable with 2 test
probes – generates a resistive load of 705 Ω which loads the
energy meter with approximately 75 W at a line voltage of 230 V.
Overload capacity: 440 V. The test instrument is supplied with a
convenient carrying case.
Variable Plug Adapter Set (article no. Z500A)
Three self-retaining, contact-
protected test probes for the
connection of measurement
cables with 4 mm banana plugs
or with contact-protected plugs
to 3.5 to 12 mm outlets, e.g.
CEE outlets, Perilex outlets etc.
For example, the test probes fit
into the square PE sockets at
Perilex outlets. Maximum allow-
able operating voltage: 600 V
per IEC 61010.
NA4/500 Mains Power Pack (article no. Z218A)
Installed Load 230 V~/4.5 V, 600 mA
The mains adapter is designed for continuous operation and
generates a minimal amount of heat. Make certain that the mains
power pack is not covered in order to ensure effective convection
cooling. Protect against moisture.
Order Information
See Measuring Instruments and Testers catalog
for additional information concerning accessories.
Description Type Article Number
Phase sequence indicator
in HC20 carrying case METRAPHASE 1 M620A
Tester for meter start-up testing
in HC20 carrying case METRASTART 1 M620B
Variable plug adapter set
3.5 ... 12 mm Z500A Z500A
Mains power pack:
230 V/4.5 V, 600 mA NA4/500 Z218A