User Manual

GMC-I Messtechnik GmbH 71
Accessories
10.4 Interface Accessories (not included)
10.4.1 Infrared Interface
USB X-TRA Bidirectional Interface Adapter
STARLINE multimeters which are equipped with a serial IrDa inter-
face can be connected to a USB port at a PC with the adapter.
The adapter allows for data transmission between the multimeter
and the PC.
METRAwin10 PC Evaluation Software (for METRAHIT ULTRA
as of 2013)
METRAwin10 PC software is a multilingual, measurement data log-
ging program for recording, visualizing, evaluating and document-
ing measured values from METRAHIT multimeters.
10.4.2 Bluetooth Interface
USB Bluetooth Adapter for PC
The following Bluetooth adapters for communication between
METRAHIT ULTRA and PC have been successfully tested so far:
Belkin F8T016NG and LOGI LINK BT0007
Bluetooth adapters by other manufacturers should fulfill the fol-
lowing technical minimum requirements:
Bluetooth 2.1 + EDR, class 2
Terminal program for PC
Indication and evaluation of the measured values received via a
Bluetooth adapter can be effected via a terminal program.
METRALOG App for Smartphone and Tablet PC
Provided you have a smartphone or tablet PC with Android oper-
ating system and Bluetooth interface, our METRALOG app in com-
bination with the METRAHIT ULTRA BT TRMS Digital Multimeter of-
fers the following functions:
• Indication of measured values received from the multimeter as:
digital or analog values, measured value curve Y(t)
and measured value logger
• Recording of measuring transactions
• Transmission of logs via wireless and network services
• Acoustic warning signal when radio contact is interrupted
• Trigger for exceeding/falling short of adjustable limit
• SMS and/or acoustic warning signal for trigger event
The METRALOG app can be obtained via the Google
Play Store (see QR code on the right) and installed on
your smartphone or tablet PC (Operating System
minimum Android 2.3.3).
Attention: For any errors in
the software especially through interaction with other
applications, any liability is excluded.
Short-form Instructions
1 Touch the app icon to start the program.
2Select METRAHIT ULTRA BT from the list of recivable Bluetooth devices.
The following message is displayed: „Bluetooth connection to measuring
instrument being established“.
3 To establish the radio communication, enter the same pin you have already
entered for the interface parameter
bt pin of the multimeter, see section 7.2.
When the connection has been successful, an analog display appears in which
the following message is shown at the bottom right „Measurement in process“.
4 You can switch between digital display, measured value curve Y(t) and ana-
log display in the bottom line on the left.
5 By touching the REC symbol, you can start or stop the recording of the
measured values.
6 Touching the magnifier symbol in the bottom line on the right takes you to
the measured value logger overview where you can select measuring inter-
vals for graphic representation of for transmission.