User Manual

50 GMC-I Messtechnik GmbH
Device and Measuring Parameters
6.3 Querying Parameters – InFo Menu
bAtt – Query Battery Voltage
1nFo bAtt 2.9 V.
OCCUP – Query Memory Occupancy
1nFo bAtt  ...  0CCvP 000 . 0 %
dAtE – Query Date
1nFo bAtt
 ...  20 . 06 . 2012 (DD.MM. YY)
D = day, M = month, Y = year
Date and time must be reentered after replacing the batteries.
tiME – Query Time
1nFo bAtt  ...  13 : 46 : 56 (hh:mm:ss)
h = hours, m = minutes, s = seconds
Date and time must be reentered after replacing the batteries.
cALdAt – Query Calibration Date
1nFo bAtt
 ...  caldat 20.06.12
vErSion – Query Firmware Version
1nFo bAtt
 ...  VEr 0.22
ItEMP intErn – Query Reference Temperature
The temperature of the internal reference junction is measured
with a temperature sensor in close proximity to the input sockets.
1nFo bAtt  ...  tEMP intern 24,7 °C
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER
MEASURE
SETUP
FUNC
ENTER