User Manual
GMC-I Messtechnik GmbH 49
Device and Measuring Parameters
6.1 Paths to the Various Parameters 6.2 List of All Parameters
bAtt:
0CCvP:
dAtE
/t iME:
caldat/
uer
tEMPintern:
1nFo
SEnd
SET
StorE
StArt
StoP
000.0
CLEAr
StArt/
StoP
hyst
rate
trig
t
.store
Submenus / parameters
time
date
addr
Com ir
irStb
apoff
Clip
beep
tempunit
tempintern
beeper
Main Menus
Query Set
Set
Set
FUNC
ENTER
FUNC
ENTER
FUNC
ENTER
FUNC
ENTER
1nfo
MEASURE
SETUP
020
.
00
V
DC
AC
TRMS
Acknowledge
FUNC
ENTER
Acknowledge
FUNC
ENTER
Acknowledge
FUNC
ENTER
Com bt
bt pin
M248B:
IR
Parameter
Page: Header
Addr
57: Configuring Interface Parameters
APoFF
51: APoFF – Specified Time for Automatic Shutdown and Continuous ON
bAtt 50: bAtt – Query Battery Voltage
bEEP 52: bEEP – Set Limit Value for Continuity Testing
beeper on
/
off
52: bEEPEr on/oFF – Activate/Deactivate Acoustic Signals
bt pin
57: bt Pin – Allocating the pin for the Bluetooth interface (M248B)
caldat 50: cALdAt – Query Calibration Date
CLEAr
24: Measurement Data Recording
CLiP 45: Direct and Pulsating Current Measurement with Current Clamp Sen-
sor, A DC and A (DC+AC)
Com bt 57: Interface Selection for METRA HIT ULTRA BT (M248B)
CoM ir 57: Interface Selection for METRA HIT ULTRA BT (M248B)
dAtE 50: dAtE – Query Date, 51: dAtE – Enter Date
EMpty
24: Measurement Data Recording
hyst
53: HYSt – Hysteresis (parameter for memory mode operation)
1nfo 50: Querying Parameters – InFo Menu
irStb
57: Configuring Interface Parameters
1tEMP 50: ItEMP intErn – Query Reference Temperature
0CCvP
24: Measurement Data Recording
rAtE
53: rAtE – Set Transmission and Storage Rate
SEnd 56: Activating the Interface
SET 51: Entering Parameters – SETUP Menu
StArt
24: Measurement Data Recording
StoP
store
temp intern 50: ItEMP intErn – Query Reference Temperature
temp unit 52: tEMP unit – Select a Unit of Measure for Temperature
t iME 50: tiME – Query Time, 51: tiME – Set Time
trig 54: triG – Trigger Conditions (parameters for memory mode operation)
tstore 54: tStorE – Recording Time (parameter for memory mode operation)
uEr
50: vErSion – Query Firmware Version