User Manual

4 GMC-I Messtechnik GmbH
Scope of Delivery Contact Persons
Recalibration Service
Our service center calibrates and recalibrates all instruments sup-
plied by GMC-I Messtechnik GmbH, as well as other manufactur-
ers, (for example after one year as part of your test equipment
monitoring system, and prior to use etc.) and offers free test
equipment management.
Repair and Replacement Parts Service
Calibration Center* and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Str. 20
90471 Nürnberg, Germany
Phone: [phone]
Fax: [phone]
e-mail: [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please contact our repre-
sentatives or subsidiaries for service in other countries.
* DAkkS calibration laboratory for measured electrical quantities,
D-K-15080-01-01, accredited in accordance with DIN EN ISO/IEC 17025:2005
Accredited quantities: direct voltage, direct current value, direct current
resistance, alternating voltage, alternating current value, AC active
power, AC apparent power, DC power, capacitance, frequency, temper-
ature
Competent Partner
GMC-I Messtechnik GmbH is certified in accordance with
DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (national accreditation body for the
Federal Republic of Germany) under registration number D-K-
15080-01-01 in accordance with DIN EN ISO/IEC 17025:2005.
We offer a complete range of expertise in the field of metrology:
from test reports and factory calibration certificates right on up to
DAkkS calibration certificates.
Our spectrum of offerings is rounded out with free test equipment
management.
As a full service calibration laboratory, we can calibrate instru-
ments from other manufacturers as well.