Operation Manual

GMC-I Messtechnik GmbH 61
Technical Data
1)
15 ... 45 ... 65 Hz ... 10 (5) kHz sine. See following page for influences.
2)
At 0  ... + 40 C
3)
Display of up to max. 5.1 V, “OL” in excess of 5.1 V.
4)
Applies to measurements at film capacitors and battery operated
5)
Lowest measurable freq. for sinusoidal meas. signals symmetrical to zero point
6)
Overload capacity of the voltage measurement input: power limiting:
frequency x max. voltage 3 x 10
6
V x Hz @ U > 100 V
7)
Overload capacity of the current measurement input:
See current measuring ranges for maximum current values.
8)
Input sensitivity, sinusoidal signal, 10% to 100% of the voltage or current mea-
suring range; limitation: up to 30% of the range at up to 100 kHz in the mV mea-
suring range, 30% of the range in the 3 A measuring range. The voltage
measuring ranges with max. 30 kHz apply in the A measuring range.
9)
Plus sensor deviation
10)
With ZERO function active
11)
Residual value of 1 to 10 d with short circuited terminal tips,
exception: mV /  A range of 1 to 35 d at zero point due to the TRMS converter
12)
10 minute cool-down period
13)
Required signal range 30% to 100% of the voltage measuring range
Key: R = meas. range, d = digit(s), rdg. = measured value (reading)
Meas.
Function
(input)
Measuring Range
Resolution
at Upper Range Limit
Intrinsic Uncertainty
under Reference Conditions
Overload
Capacity
2)
3000
Value Time
Discharge resist. U
0 max
(... % rdg. + ... d)
F
30.00 nF 10 pF 10 M 0.7 V 1 + 6
4)
with ZERO function active
1000 V
DC
AC
RMS
Sine
max. 10 s
300.0 nF 100 pF 1 M 0.7 V 1 + 6
4)
3.000 F1nF100k 0.7 V 1 + 6
4)
30.00 F10nF12k 0.7 V 1 + 6
4)
300.0 F 100 nF 3 k 0.7 V 5 + 6
4)
f
min
5)
(... % rdg. + ... d)
Hz (V)/
Hz (A)
Hz (A )
300.0 Hz 0.1 Hz
1Hz
0.1 + 2
8)
Hz (V)
6)
:
Hz(A )
6)
:
1000 V
Hz (A):
7)
max. 10 s
3.000 kHz 1 Hz
30.00 kHz 10 Hz 10 Hz
Hz (V)
300.0 kHz 100 Hz 100 Hz
Resolution Voltage-R
13)
Frequency-R
(... % R + ... d)
%
2.0 .... 98.0
0.1 %
3 V
15 Hz ... 1 kHz
0.2% R + 8 d 1000 V
DC
AC
RMS
Sine
6)
Cont.
10.0...90.0
1 kHz ... 4 kHz
0.2% R/kHz + 8 d
5.0 .... 95.0
30 V
15 Hz ... 1 kHz
0.2% R + 8 d
10.0...90.0
1 kHz ... 4 kHz
0.2% R/kHz + 8 d
300 V & 1000 V possible, but not specified
(... % rdg. + ... d)
9)
C
Pt 100
– 200.0 ...
+850.0 C
0.1 C
0.5 %+ 15
1000 V
DC/AC
RMS
Sine
max. 10 sPt 1000
– 150.0 ...
+850.0 C
0.5 %+ 15
K
(NiCr-Ni)
– 250.0 ...
+1372.0  C
1% + 5 K