User Manual

GMC-I Messtechnik GmbH 15
Operating Overview – Connections, Keys, Rotary Switch, Symbols
User Interface Symbols in the Following Chapters
... Scroll through main menu
... S croll through submenu
Select decimal point
 Increase/decrease value
time Submenu/parameter (7-segment font)
1nFo Main menu (7-segment font, boldface)
Symbols on the Device
Warning concerning a point of danger
(attention: observe documentation!)
Ground
CAT II / III Measuring category II or III device, see also
“Measuring Categories and their Significance per IEC
61010-1” on page 8.
Continuous, doubled or reinforced insulation
Indicates EC conformity
IR
Position of the infrared interface, window on the top of the
instrument
Position of the power pack adapter socket,
see also chapter 3.1.
Fuse for current measuring ranges (see chapter 9.3)
The device may not be disposed of with the trash.
Further information regarding the WEEE mark can be
accessed on the Internet at
www.gossenmetrawatt.com under the search term
WEEE (see also chapter 9.5).
Calibration seal (red seal):
See also “Recalibration Service” on page 64.
!
5 V / 600 mA