Datasheet

ManualsBrandsGossen Metrawatt ManualsDigital Multimeters - HandheldDigital Multimeter, 1kV, 1MHz, 60MOhm

METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE

TRMS Digital Multimeters

3-349-454-03

2/4.08

GMC-I Gossen-Metrawatt GmbH

DQS Certified per

DIN EN ISO 9001:2000

QUALITY MANAGEMENT SYSTEM

reg. no.1262

Calibration Certificate included

Applications

The instruments of the E- and high resolution series are extremely

rugged, reliable digital multimeters with housings made of impact

resistant ABS.

With a resolution of 60,000 counts and up to 26 different measur-

ing functions, they’ve been developed for professional use.

Features

Three Connector Jacks with Automatic Blocking Sockets (ABS) *

All current ranges are implemented via a single connector jack

which prevents any possibility of operator error. Auto-ranging is

available in all current measuring ranges.

Also the automatic blocking sockets prevent incorrect connection

of the measurement cables, as well as selection of the wrong

measured values. Danger to the user, the instrument and the

device under test resulting from operator error is eliminated.

* Patented (patent no. DE 10 2005 062 624)

Overload Protection

The instrument is safeguarded for up to 1000 V in all measuring

functions by overload protection. Voltages of greater than 1000 V

and current of greater than 10 or 16 A are indicated acoustically.

Dangerous contact voltages are indicated when the 1 kHz low-

pass filter is activated.

The FUSE display appears at METRAHIT EXTRA and METRAHIT ETECH

instruments in order to indicate that the fuse for the current mea-

suring input has blown.

RMS Value with Distorted Waveshape

The utilized measuring method allows a waveshape

independent RMS measurement (TRMS AC and AC+DC) for

voltage and current (METRAHIT E

XTRA up to 20 kHz).

Selectable Filter for V AC Measurement

A 1 kHz low-pass filter can be selected if required, for example to

measure the motor voltage at electronic frequency

converters. The input signal is checked by a voltage comparator

for dangerous voltages as long as the low-pass filter is

activated. A high-voltage symbol appears at the display if

dangerous voltage is present.

Measuring 5 V Square-Wave Signals with the METRAHIT E

XTRA

This function allows to test circuits and transmission cables by

measuring the frequency and the duty cycle of pulses with ampli-

tudes of 2 to 5 V and frequencies of 100 Hz to 1 MHz.

Analog Scale for Quick Trend Display – Bar Graph or Pointer

The analog scale (with additional negative range for zero-

frequency quantities) allows for faster recognition of measured

value fluctuation than is possible with a digital display.

The instrument can be switched back and forth between bar

graph and pointer display via the menu.

Automatic or Manual Measuring Range Selection

Measurement functions are selected by a rotary dial and a func-

tion key. The measurement range selection is done automatically

according to the input signal. Manual measurement range selec-

tion is possible via function key.

• Digital Hand-Held Multimeters with RMS Measurement

amongst other features including:

AC TRMS

, V

AC+DC TRMS

, V

, Hz (V), Hz (A),

, V , °C/°F (TC)

• Resolution of 60,000 counts, can be changed to 6000 via the

menu, display illumination can be activated for difficult

lighting conditions

METRAHIT EBASE

• Current measurement via clamp current sensors:

The transformation factor is adjustable from 1 mV:1 mA to

1 mV:1 A and the factor is calculated for the display.

METRAHIT ETECH

• Direct Current measurement with increased accuracy and

Current measurement, via clamp current transformer and sensors

• Broad range capacitance measurement

METRAHIT E

XTRA/ETECH/ESPECIAL

• Special low-impedance alternating voltage measurement (1 M

)

• 1 kHz / -3 dB low-pass filter can be activated

METRAHIT E

XTRA

• Direct current measurement from 10 nA to 10 A, 16 A for short periods

• Temperature measurement with Pt100/Pt1000 resistance ther-

mometer

• Broad range capacitance measurement

METRAHIT ESPECIAL

• Special instrument for the performance of measurements at

current transformer circuits

Summary of content (8 pages)

PAGE 1
METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE TRMS Digital Multimeters Digital Hand-Held Multimeters with RMS Measurement amongst other features including: VAC TRMS, VAC+DC TRMS, VDC, Hz (V), Hz (A), Ω, V , °C/°F (TC) • Resolution of 60,000 counts, can be changed to 6000 via the menu, display illumination can be activated for difficult lighting conditions METRAHIT EBASE • Current measurement via clamp current sensors: The transformation factor is adjustable from 1 mV:1 mA to 1 mV:1 A and the factor is calculated for
PAGE 2
METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE TRMS Digital Multimeters Measurement with current clamps and sensors Current clamps and sensors are used for current measurements without interrupting the circuit under test and for high currents above 16 Amps. All E series multimeters offer convenient measurement with current clamps. The measured current value is automatically calculated for the user with the help of the adjustable clamp factor.
PAGE 3
METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE TRMS Digital Multimeters Specifications Meas. Function Measuring Range V 600 mV 6 V 60 V 600 V 1000 V A ~ ~ ~ ~ ~ 0.01 dB 0.6/6/60/600 A 6/60/600/6000 A A Ω F EXTRA ETECH Hz (V) Hz (A) Hz (A ) Hz (V) MHz EXTRA % 600 6 60 600 6 60 600 6.0 Ω kΩ kΩ kΩ MΩ MΩ Ω V 3) 60 600 6 60 600 nF nF μF μF μF 10 mΩ 100 mΩ 100 mΩ 1 Ω 1 Ω 10 Ω 10 Ω 100 Ω 100 Ω 1 kΩ 1 kΩ 10 kΩ — 0.1 Ω — 1 mV — — — — — 10 100 1 10 100 pF pF nF nF nF 0.01 Hz 0.1 Hz 0.1 Hz 1 Hz 60.
PAGE 4
METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE TRMS Digital Multimeters Internal Clock Time format DD.MM.YYYY hh:mm:ss Resolution 0.1 s Accuracy ±1 min. per month Temperature Influence 50 ppm/K Influencing Quantity Interference quantity max. 1000 V Common Mode Interference Voltage Series Mode Interference Voltage Influencing Quantities and Influence Error Influencing Quantity Sphere of Influence Measured Quantity / Measuring Range 1) V 0.2 + 10 V 0.4 + 10 0.5 + 10 > 6 MΩ Temperature 1) 1 + 10 mA/A 0.
PAGE 5
METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE TRMS Digital Multimeters Power Supply Battery Service life Battery test Power OFF function Power pack socket (METRAHIT EXTRA) Fuse for METRAHIT EXTRA, METRAHIT ETECH 2 ea. 1.5 V mignon cell (2 ea. size AA), alkaline manganese per IEC LR6 (2 ea. 1.2 V NiMH rechargeable battery also possible) with alkaline manganese: approx. 200 hours Battery capacity display with battery symbol in 4 segments: . Querying of momentary battery voltage via menu function.
PAGE 6
METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE TRMS Digital Multimeters Accessories for Operation at a PC Interface Adapter for USB Connection The following functions can be executed with the USB X-TRA bidirectional interface adapter: • Configure the METRAHIT Multimeter from a PC. • Transmit live measurement data to the PC. • Read out data from memory at the METRAHIT EXTRA. The adapter does not require a separate power supply. Its baud rate is 38,400 baud.
PAGE 7
METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE TRMS Digital Multimeters Order Information Designation Transport Accessories Type Article Number METRAHIT EXTRA, METRAHIT ETECH, METRAHIT ESPECIAL and METRAHIT EBASE Multimeters 60,000 counts TRMS multimeter with direct, alternating and pulsating voltage measurement (TRMS values), frequency measurement, resistance measurement, continuity test, diode measurement andtemperature measurement with type K thermocouples LCD with 15 mm characters, analog bar graph and backgrou
PAGE 8
METRAHIT⏐EXTRA⏐ETECH⏐ESPECIAL⏐EBASE TRMS Digital Multimeters Current Measuring Accessories Suitable for METRA HIT⏐ All current sensors and transformers are equipped with a terminal with 4 mm safety banana plugs Type Designation Measuring Range Meas. Max. Transformation Category Wire Dia. Factor Frequency Range DC/AC clamp current sensor, 0.01 ... 20 A~/30 A– with battery mode (30 h) Z202A DC/AC clamp current sensor, 0.1 ... 20 A~/30 A–; with 2 measuring ranges, 1 ...