User Manual

GMC-I Messtechnik GmbH 90

Accessories

10.4 PMA 16 Power Measuring Adapter (Z228A: not included)

The PMA 16 power measuring adapter is an intermediate plug for

safe, trouble-free measurement of power consumption of single-

phase consumers connected by means of a plug. The power con-

sumer’s protective conductor remains functional during measure-

ment.

10.5 Interface Accessories (not included)

USB X-TRA Bidirectional Interface Adapter (Z216C)

E series METRAHIT multimeters which are equipped with a serial

IrDa interface can be connected to a USB port at a PC with the

adapter. The adapter allows for data transmission between the

multimeter and the PC.

METRAwin10 PC Analysis Software

METRAwin10 PC software is a multilingual, measurement data log-

ging program for recording, visualizing, evaluating and documen-

ting measured values from METRAHIT multimeters.

The following conditions must be fulfilled in order to allow for use of

METRAwin10:

Hardware

– IBM compatible Windows PC, 200 MHz Pentium processor

or faster with at least 64 MB RAM

– SVGA monitor with at least 1024 x 768 pixels

– Hard disk with at least 40 MB available memory capacity

– CD ROM drive

– Microsoft compatible mouse

– Windows supported printer

– 1 USB port each for connecting the multimeter via the

USB X-TRA

Software

– MS Windows 98, ME, 2000, XP, VISTA (32 or 64 bit)

or 7 (32 or 64 bit)

COM

Tem p

mA A

Load

PMA16

RedBlue

Black