User manual

METRAwin 90 - Operating Instructions
GOSSEN METRAWATT 6
1.3 System Requirements
Operating System
90 can be run with Microsoft
Windows XP, Vista and 7 (32 or 64-bit).
Hardware Requirements
90 can be used on PCs which fulfil the minimum requirements of the
CD ROM drive
Microsoft compatible mouse or other pointing device
For controlling METRAHit 18C, 28C or 28C light process calibrators and for reading in
measured values from METRAHIT 2X multimeters with METRAwin
®
90-2:
A least 1 free serial RS
adapters or SI232-II memory adapters
Or USB port(s) for the connection of 1 to 3 USB-HIT interface adapters
For controlling METRAHit CAL or METRACAL MC process calibrators and for reading in
measured values from METRAHIT Starline multimeters with METRAwin
®
90-2:
USB port(s) for the connection of 1 to 3 USB-XTRA interface adapters
For controlling FLUKE multifunction calibrators with METRAwin
®
90-F/-FJ:
1 installed or external GPIB controller interface (IEEE488) with National
Instruments
compatible protocol and drivers suitable for the Windows system,
for example:
National Instruments PCI-GPIB NI-488.2 or
National Instruments GPIB-USB-B NI-488.2
For printing reports:
Local or network printer which is supported by Windows
Other Required Software
Microsoft
®
Word 97, 2000, 2003, 2007 or 2010 or another word processing
program for the automatic creation of a fax form in RTF file format (rich text
format)
Or Microsoft
®
Outlook or another e-mail program for the automatic creation of an
e-mail with registration data
tion reports with company logo and/or modified
Microsoft
®
Word 97, 2000, 2003, 2007 or 2010
Or Microsoft
®
Excel 97, 2000, 2003, 2007 or 2010
Adobe
®
AcrobatReader available free of charge from
www.adobe.com/acrobat