User manual

METRAwin 90 - Operating Instructions
GOSSEN METRAWATT 2
Copyright
Copyright © 2003 - 2013 GMC-I Messtechnik GmbH. All rights reserved.
These operating instructions, as well as the software described herein, are protected by copyright.
Duplication of this document and/or the software is prohibited without previous express consent.
Violators are liable for compensation of damages.
Trademark
METRAwin
®
90 is a registered trademark of GMC-I Messtechnik GmbH.
Products from other manufacturers are mentioned in these operating instructions for strictly
informational purposes, and their mention does not represent any misuse of the respective
trademarks.
Exclusion of Liability
The texts and illustrations included herein have been compiled with the greatest of care. Despite all
of these efforts, errors can never be entirely prevented. For this reason, no guarantee can be made
for the correctness of the contents of this document. We assume no legal responsibility or liability
of any sort for incorrect entries or their consequences. We appreciate your suggestions for
improvement, as well as any information regarding errors.
We make every effort to keep these instructions up-to-date in accordance with the latest software
version. It is nevertheless possible that differences may exist between the software and the
instructions. Further information may be provided in a
“README.TXT” file included on the provided
data storage medium, or in the program directory after the software has been installed.
Subject to change without notice.
Preface
Purpose of the Program
METRAwin 90
calibration software is a Windows program for controlling various
calibrators for electrical quantities
with the help of a PC, and for documenting
calibration results.
Contents of these
Operating Instructions
This document describes the use of the general program functions provided by the
software.
The program
’s device-specific functions are described in s
eparate documents which
can be accessed, depending on the currently selected device type, by clicking
Device Functions
in the Help menu.
Further information regarding device
-specific functions is included in the operating
instructions for the respective de
vices.
Target Group
These instructions are intended for users of the software.
The software is designed for use with the Microsoft Windows
®
graphic user
interface. Users must be familiar with basic Windows
®
functions.
Scope of Validity
These instructions
are valid for METRAwin 90 as of version 4.00.
i
Note
The version number can be displayed by clicking
About in the Help menu.
Support
If you have any questions about using this software, please contact:
•
Your GOSSEN METRAWATT sales partner
•
The address which can be accessed by clicking About in the Help menu
GMC-I Messtechnik GmbH
Product Support Hotline
Phone : [phone]
e-mail: [e-mail]