User manual

METRAwin 90 - Operating Instructions
GOSSEN METRAWATT 19
METRAtop 90C/D9000/D9100 FLUKE 5100A/5500A/5520A/5700A
3.4.3 Port Settings
The corresponding dialog box appears after clicking
Port Setup in the Setup menu.
Its content depends on which
type of calibrator is currently selected to be controlled.
Device
-specific port settings are described in a separate document. This document
can be accessed after clicking
Device Functions in the Help menu.
a) For METRAtop 90C / FLUKE D9000, D9100, 5100A, 5500A, 5520A and 5700A multifunction calibrators
Figure
3.4.3-a: Port Settings for FLUKE 5XXXA with METRAHit 1XS and SI232 Adapter
b) For METRAHit CAL and METRACAL MC process calibrators
Figure
3.4.3-b: Port Settings for METRAHIT CAL and USB X-TRA with METRAHit X-TRA and
USB X
-TRA