User manual

METRAwin 90 - Operating Instructions
GOSSEN METRAWATT 15
test report header data will be loaded from the Open dialog box which then appears.
►
The test procedure can be saved to the data storage medium with or without
results by clicking [Save] (see
Save in the File menu).
If the test procedure includes results in at least one line, the desired printer can
be selected and the standard calibration report can be printed out after clicking the
[Print]
button. This report is laid out as shown below:
Figure 3.3.1-d: Example of a Standard Calibration Report
Alternatively, a calibration report with individualized layout and content can be
created with the help of the
Export Test Data menu function.
File:
Printer settings
Select and configure an installed printer for report printing.
This command opens the standard Windows dialog box for printer configuration, in
which the printer to be used for printing out the calibration re
port can be selected
and configured.
File:
Export test data
Export the calibration data to an individually laid out Word/Excel report template
.
If the standard calibration report doesn
’t contain the desired calibration parameters
or if you want it to in
clude, for example, a company logo, the calibration and report
header data can be exported to an individually laid out Word or Excel report