User manual

METRAwin 90 - Operating Instructions
GOSSEN METRAWATT 14
⇒ You’re prompted to enter a filename in the Save as ... dialog box which then
appears. The KLF file type is used for procedure files without results, and the
KLT file type for procedure files with results.
►
A text with up to 130 characters including 2 lines can be entered to the
Comment field as a description of the data included in the file. This comment
appears in the Open dialog box before a measurement data file is opened after
the file has been selected from the list.
►
Files can be saved to local drives, or to network drives to which a connection has
been established. Select the desired directory path to which the file will be saved
in the Save dialog box.
►
The file is saved to the selected directory using the desired filename by clicking
the [OK] button.
►
Saving the file can be aborted by clicking the [Cancel] button or by pressing the
“ESC” key.
i
Note 1
If the name of an already existing file is entered, a security prompt appears which asks t
he
user if he want
s to overwrite the respective file.
i
Note 2
Further Information regarding elements in this dialog box can be accessed via the direct help
function: First click
? in the title bar of the window, and then click the element for which help
is required. A popup window with an appropriate explanation appears. This explanation can
also be display
ed by clicking the element with the right mouse button and then clicking Direct
help
in the context menu which then appears.
File:
Print test report
Print out a standard calibration report with a predefined structure.
⇒
The Test Protocol Header dialog box appears first with numerous entry fields:
Figure
3.3.1-c: The Test Protocol Header Dialog Box
►
Enter information regarding the device to be calibrated (DUT) and the calibration
conditions to the entry fields in the left-hand column.
►
Information regarding the utilized calibration equipment can be entered to the
fields in the right-hand column.
►
Alternatively, these data can be read in from a previously saved test procedure file
(*.KLT/*.KLF). Click the [Load] button to this end and select the file from which the