User manual

METRAwin 90 - Operating Instructions
GOSSEN METRAWATT 12
3.3.1 File Menu Functions
File:
New
Deletion of the data associated with a calibration procedure in the TEST operating mode
All of the steps of any previously created or loaded test calibration procedure are
deleted after confirming the sec
urity prompt.
File:
Open
Open a calibration procedure file with/without results in the TEST operating mode.
►
A previously saved calibration procedure file can be selected and loaded to
temporary memory after clicking Open in the File menu while in the TEST
operating mode.
⇒
The Open dialog box which then appears prompts you to select or enter the
filename
of the file to be opened. As a default function, the last saved or opened
file is suggested.
Figure
3.3.1-a: Dialog Box for Opening a Calibration Procedure File
Calibrating procedure filenames end with
.KLT (procedure with results) or .KLF
(procedure template without results). Program files which can be loaded to the
METRAHit 18C calibrator
have a filename ending with .KLP.
►
Files located on local drives, or on network drives
to which a connection has been
established, can be opened. Select the directory path to the desired file in the
Look in dialog box.
►
By clicking a file in the file list, it’s selected as the measurement data file to be
opened. If a comment text was entered when the selected file was saved, the text
appears in the Comment field. Click [Open] in order to open the selected file.