Operation Manual

GMC-I Messtechnik GmbH 27
GB
18 Repair and Replacement Parts Service
Calibration Center *
and Rental Instrument Service
If required please contact:
GMC-I Service GmbH
Service Center
Thomas-Mann-Strasse 20
90471 Nürnberg • Germany
Phone [phone]
Fax [phone]
E-mail [e-mail]
www.gmci-service.com
This address is only valid in Germany. Please contact our
representatives or subsidiaries for service in other countries.
* DAkkS Calibration Laboratory for Electrical Quantities
D-K-15080-01-01 accredited per DIN EN ISO/IEC 17025:2005
Accredited measured quantities: direct voltage, direct current
values, DC resistance, alternating voltage, alternating current
values, AC active power, AC apparent power, DC power,
capacitance, frequency and temperature
Competent Partner
GMC-I Messtechnik GmbH is certified per
DIN EN ISO 9001:2008.
Our DAkkS calibration laboratory is accredited by the Deutsche
Akkreditierungsstelle GmbH (National accreditation body for
the Federal Republic of Germany) in accordance with DIN EN
ISO/IEC 17025:2005 under registration number D-K-15080-
01-01.
Our competence in the field of metrology covers test reports,
proprietary calibration certificates and DAkkS calibration certificates.
Our range of services is complemented by a Test Equipment
Management service which is provided free of charge.
An on-site DAkkS calibration station is an integral part of our ser-
vice department. If any faults are detected during calibration,
our specialists are able to carry out the necessary repairs with
original replacement parts.
Needless to say, in our function as calibration laboratory, we
calibrate all instruments, irrespective of the manufacturer.
19 Manufacturer’s Guarantee
All METRAHIT digital multimeters and calibration instruments
are guaranteed for a period of 3 years after shipment. The
manufacturer’s guarantee covers materials and workmanship.
Damages resulting from use for any other than the intended
purpose or operating errors, as well as any and all consequen-
tial damages, are excluded.
The calibration certificate confirms that the product conformed
to the specified technical data at the time of calibration. We
guarantee the observance of the specified technical data within
the admissible tolerance limits for a period of 12 months from
delivery.