Operation Manual

GMC-I Messtechnik GmbH 15

Ð After the desired parameter has been selected, the various

possible setting can be called up by activating the ↵ key.

Ð The desired value can be selected by repeatedly activating

the  key.

Ð Acknowledge with the ↵ key and return to operation in the

measuring mode.

Ð Entry can be interrupted by pressing the ESC|FUNC key, after

which “rAtE” appears at the display. If the ESC|FUNC key is

activated once again, the instrument is returned to operation

in the measuring mode.

Ð In order to turn the multimeter off, press and hold the ↵ key

until the display goes blank.

Example: “Setting and Activating the Filter”

A interference suppressing filter can be activated for the mea-

surement of current or voltage.

No filter: value = 1, greatest level of filtering: value = 16

rAtE FILt 1 2 4 .

or in abbreviated form:

rAtE  FILt ↵ 1  2  4 ↵ .

Paths to Measuring and Operating Parameters



↵



↵

rAtE OFF, 10 ms, 100 ms, 1 s, 10 s, 60 s

Addr 1, 2, 3, 4, 5, 6, 7 ... 15

rS 232 9600, 19200

InFo tESt, uEr, MEM, CLEAr, CALdAtE, CALdUE

SEnSor Pt 100, Pt 1000, J, K, IntErn, E-tErn

tEMP °C, °F

FILt 1, 2, 4, 8, 16

Parameter

↵

Menu Mode

MENU/

ON|OFF

rate

Settings / Adjustable Values

↵





