Datasheet
METRAHIT27M, 27I and H+E CAR
Milliohm Resistance Meter and Digital Multimeter,
Insulation Tester and Data Logger
8 GMC-I Messtechnik GmbH
Cordura belt pouch HitBag
for multimeters of the
METRA HIT and
METRAport series
Recording System with BD Pack
This option includes all addi-
tionally required hardware
and software components for
creating a PC supported
measuring and recording sys-
tem together with the METRA
HIT 27. A full version of
METRAwin
10/METRA HIT is
included with this package,
which can be run with Win-
dows 95, 98, 2000, NT, XP,
VISTA or 7 (see figure on
page 2).
USB-HIT Interface Adapter
Regarding its functions, this
adapter conforms to the
BD232 interface adapter,
except that the bidirectional
transmission takes place
between the IR and USB inter-
face.
It is not possible to establish a
multi-channel system with this
adapter.
l Without restriction
Current Measuring Accessories suitable for
METRA HIT
All current sensors and transformers are equipped with a connector cable (1.2 to 1.5 m long) with 4 mm safety banana plugs
Type Designation Measuring Range Meas.
Category
Max.
Wire Dia.
Transformation
Ratio
Frequency
Range
Intrinsic Error
±(% rdg. + ...)
Article
Number
27M/I
H+E
CAR
AC/DC Current Sensors with Voltage Output
CP30 DC/AC clip-on current sensor,
with battery mode (30 h)
5 mA ... 30 A 300 V /
CAT III
25 mm 100 mV/A DC...20 kHz
(-1dB)
1 % +2 mA Z201B
l
CP330 DC/AC clip-on current sensor,
with 2 measuring ranges,
battery mode (30 h)
0,5 ... 30 A
5 ... 300 A
300 V /
CAT III
25 mm 10 mV/A;
1 mV/A
DC...20 kHz
(-3 dB)
1 % + 50 mA
1 % + 100 mA
Z202B
l
CP1100 DC/AC clip-on current sensor,
with 2 measuring ranges,
battery mode (30 h)
0,5 ... 100 A
5 ... 1000 A
300 V /
CAT III
32 mm 10 mV/A;
1 mV/A
DC...20 kHz
(-1dB)
1 % + 100 mA
1 % + 500 mA
Z203B
l
Z13B Clip-on current sensor with 2
measuring ranges, battery
mode (50 h)
0.2 ... 40 A~/60 A–,
0.5 ... 400 A~/600A–
300 V /
CAT IV
50 mm 10 mV / A,
1 mV / A
DC ... 65 Hz
... 10 kHz
1.5% + 0.5 A
2.5%
Z13B
l
AC Current Sensors with Voltage Output
WZ12B Clip-on current sensor 10 mA~ ... 100 A~ 300 V /
CAT III
15 mm 0.1 mV / mA 45 ... 65
... 500 Hz
1.5% +0.1 mA Z219B
l
WZ12C Clip-on current sensor with 2
measuring ranges
1 mA~ ... 15 A~,
1 ... 150 A~
300 V /
CAT III
15 mm 1 mV / mA,
1 mV / A
45 ... 65
... 400 Hz
3% + 0.15 mA,
2% + 0.1 A
Z219C
l
WZ11B Clip-on current sensor with 2
measuring ranges
0.5 ... 20 A~,
5 ... 200 A~
600 V /
CAT III
20 mm 100 mV / A,
10 mV / A
30... 48... 65
... 500 Hz
1 ... 3% Z208B
l
Z3512A Clip-on current sensor with 4
measuring ranges
1 mA ... 1/10 A~
100/1000 A~
600 V /
CAT III
52 mm 1 V/A, 100 mV/A,
10 mV/A, 1 mV/A
10... 48... 65
... 3 kHz
0.5 ... 3%,
0.2 ... 1%
Z225A
l