Operation Manual

GMC-I Messtechnik GMBH 11

•via DATA function, see chapter 6.1. After the first mea-

surement, the proper measuring range will be auto-

matically determined so that measurements are per-

formed more rapidly from the second measured value

onwards.

With both functions, the established measuring range is

maintained for the subsequent series mode measurments.

5 Triple Digital Display

The three digital displays (1 main display and 2 auxiliary

displays) show the measured value with decimal and plus

or minus sign. The selected unit of measure is displayed as

well.

“0L” (overload) appears if the measuring range upper limit is

exceeded for the following measured quantities (the red

ERROR LED lights up simultaneously and openl appears

on the auxiliary display):

300 m, 3 , 30 : 30999

30 m: 3099

The digital display is refreshed at different frequencies for

the various measured quantities.

The main display appears immediately after the milliohm-

meter is switched on, but the auxiliary displays have to be

activated by pressing the DATA |CLEAR key.

In the following flowcharts, the initial displays are high-

lighted through the use of a bold border line.

023.00

022.00 data

m

Auxiliary Display Auxiliary Display

MAN

Main Display