Datasheet

METRACLIP

61
Digital Current Clamp Meter
Edited in Germany • Subject to change without notice • A pfd version is available on the internet
GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •
Germany
Phone [phone]
Fax [phone]
E-Mail [e-mail]
www.gossenmetrawatt.com
LCD Panel
Display 7-segment characters
and bargraph
Number of digits 3½ digits, max. display: 3200
Sampling rate Digital display: 2 per second
Bargraph: 12 per second
Overflow display OL appears
DATA HOLD display DH appears
Power Supply
Batteries 2 x LR44 or SR44
Service life with LR44 (alkaline manganese):
approx. 50 hours (approx. 5 mW)
Battery test is displayed automatically if battery
voltage drops to below approx. < 2.7 V.
Automatic
shutdown The device turns itself off automatically
10 minutes after it has been switched on.
Electrical Safety
Safety class II per IEC 61010-1
Measuring category II 600 V
III 300 V
Dielectric strength 3.7 kV AC max. 1 minute
between cable core and clip housing
Maximum voltage at
the circuit under test 600 V AC
Electromagnetic Compatibility (EMC)
Interference emission IEC 61236-1
Interference immunity IEC 61236-1
Ambient Conditions
Operating
temperatures 0 °C … +40 °C
Storage
temperatures −10 °C … +60 °C
(without batteries)
Relative humidity max. 80%,
no condensation allowed
Elevation up to 2000 m
Mechanical Design
Protection IP 40
Clamp opening max. diameter 40 mm
Dimensions W x H x D:
64 mm x 176 mm x 23 mm
Weight approx. 125 g with batteries
Standard Equipment
1 digital current clamp meter
2 button cells
1 Imitation leather pouch
1 Set of operating instructions
Order Information
Factory calibration certificate optionally available
Description Type Article Number
Digital current clamp meter METRACLIP

61 M311D