Operation Manual

6-6
Demand Parameters, continued
Demand
parameter setup
(continued)
Continued on next page
Action... Result...
STEP 3: Use Start of week to
determine the exact day when the
weekly reporting will start.
•Press the Start of week button
repeatedly to display the
following selection values:
Mon, Tue, Wed, Thu, Fri, Sat
or Sun.
•Press OK to accept changes in
the day of week setting .
•Press Cancel to retain previous
setting and return to Demand
Parameters screen.
EP112_203
STEP 4: Use Carbon footprint
constant to enter the constant
value that the instrument will use
to calculate the amount in lbs/kg
of CO2 produced for every kW-hr
of electricity generated.
•Press Mass CO2 per Wh to
display the numeric pad to use
to enter constant value. Below
are suggested constant values
for:
• coal or oil generated
electricity = 1 kg/kWhr
• solar generated electricity
= .050 kg/kWhr
• hydro or wind generated
electricity = .010 kg/kWhr
NOTE: 1kg = 1000g = 2.2 lbs
•Press the CO2 units button
repeatedly to display selections
for unit of measure: Lb-CO2,
Kg-CO2
•Press OK when done.
EP112_205