Operation Manual
Table Of Contents
- Title Page - Energy Platform User Guide
- Table of Contents
- Chap 1 Getting Started
- Chap 2 Voltage Measurement Cable and Current Probe Connections
- Chap 3 View Real Time Data
- Chap 4 Instrument Settings
- Chap 5 Start Menu
- Chap 6 Advanced Setup Options
- Chap 7 View Event Data
- Chap 8 Reports
- Chap 9 Downloading Events
- Appendix A Optional Accessories
- Appendix B Technical Specifications
- Appendix C Battery Specifications and Replacement Procedure
- Appendix D User Replaceable Parts List
- Appendix E Common Circuit Connections
- Appendix F Event Classification
- Appendix G Energy Platform Menu Structure
5-31
CH 5/ Start Menu
Monitoring
using start &
end time
(continued)
Action... Result...
STEP 3: The screen will display
the new settings once the
monitoring Start time/date and
End time/date have been set.
• Press the time and date
function keys when you want to
change time/date monitoring
settings. Refer back to Step 2
on page 5-29.
•Press OK when done setting
the Start and End monitoring
time/date. Proceed to Step 5.
•Press Cancel to discard the
changes in time/date
monitoring settings and return
to Monitoring Menu.
EP129b
STEP 4: After specifying the Start
and End time/date of monitoring,
the message MONITORING
STATUS: ARMED appears on
screen.
Armed means that the system
will automatically begin
monitoring at the specified Start
time and date.
Once monitoring status is ON,
follow the Start/Stop monitoring
procedure found on page 5-26.
EP130