Datasheet

Luxmeters / Footcandle Meters
MAVOLUX 5032 C USB / MAVOLUX 5032 B USB
Features
• Illuminance can be measured in Lux or Footcandle
• Luminance can be measured in candles per square
meter (cd/m²) or Footlambert (fL) with optional
luminance attachments
• Wide measuring ranges
• High resolution
• Meets Standards DIN 5032-7 and CIE no. 69
• Silicon photo diode, colour corrected, i.e. its spectral
responsitivity is matched to the spectral phototic vision
of the human eye V (λ). The accuracy of that V (λ)
matching is the main difference between the two
MAVOLUX types C and B
• Cosine correction for oblique inciding light
• USB 1.1 Interface
• CD Rom with software for processing the values
measured and regulating the meter
• Rugged instrument design, easy operation
• Ever-ready case, USB-cable included
Applications
Digital Luxmeters and Luminance meters classified according to
DIN 5032-7 and CIE 69. Wide range of applications: for light
technicians, for the control of light sources, street lights, lighting
of work places, public buildings, sports facilties;for quality control
and quality assurance in the manufacture of lamps and light
sources; for light designers and architects; for measurements in
agriculture and horticulture.
Both MAVALUX types allow measuring very high light intensities
(brightest daylight, head lights) without any additional
accessories. Expecially the MAVOLUX 5032 B having an initial
sensitivity of 0.01 lx allows measuring extremely low light
intensities, such as emergency lighting. Most important: The
MAVOLUX 5032B is optimally suited for certification and official
inspection procedures due to its high precision acc. to Class B.
Functions and Technical Data
Automatic / Manual Measuring Range Selection
Either Lux or footcandles can be selected as a measurement
unit. The measuring range is matched automatically to the
measurement value. The current measuring range can be locked
by pressing a key, or any one of four or five (MAVOLUX 5032B
USB) measuring ranges can be selected manually.
Function „Hold“
The current measurement value can be held at the display by
pressing the data hold key.
Function „Mem“
Storage in memory of upto 100 values, read-out in the display or
via USB port
Measuring rate
2 measurements per second
Light sensor
Silicon photo diode with V (λ) filter, complies with accuracy
class
MAVOLUX 5032 C USB: DIN 5032-7 Class C
MAVOLUX 5032 B USB: DIN 5032-7 Class B
Display
LCD display size 50 mm x 25 mm
Display/Digit Height 7 segments characters/13 mm
3 ½ digits
Overload Display „OL“ appears in display
Power Supply
Battery 1,5 V alkaline-manganese cell
(IEC LR 6), size AA
Battery Life approx. 45 hours continuous operation,
When the meter is connected to a PC,
power will be supplied by the PC via the
USB cable
Battery test „ “ symbol is automatically displayed
when battery voltage drops below
appr.1V
________________________________________________________________________________________________________________________
Page 2 GOSSEN Foto- u. Lichtmesstechnik GmbH