Datasheet
MINITESTMASTERPROBASE
Testers per DIN VDE 0701-0702
4 GMC-I Messtechnik GmbH
Standard Equipment
1 tester
Accessories, see table below
Accessories
Calibration Adapter SECU-cal 10
The calibration adapter is designed for testing the measuring
safety of test instruments per DIN VDE 0701-0702/0751. As a
rule, according to the requirements set forth in the accident pre-
vention regulation BGV A3 (formerly VBG 4) and as part of a certi-
fication in accordance with the ISO 9000 quality standard, these
test instruments must be inspected once a year.
All limit values for the required tests per DIN VDE must be tested,
such as protective conductor resistance, insulation resistance,
equivalent leakage current, differential current and/or contact or
housing leakage current.
Test adapter VL2 E
The VL2 E test
adapter in addition
to the test instru-
ment allows for the
measuring and
testing of electrical
devices and exten-
sion cables with
CEE plug-and-
socket devices.
Case Z740B
Outer dimensions:
W x H x D
394 x 294 x 106 mm
Universal Carrying Pouch F2000
Outer dimensions:
W x H x D
380 x 310 x 200 mm
(without buckles,
handle and carrying
strap)
Universal Carrying Pouch Big F2020
Outer dimensions:
W x H x D
430 x 310 x 300 mm
(without buckles,
handle and carrying
strap)
Standard equipment accessories
of Serie MINITEST... series
MINITEST 3PMASTER
MINITESTMASTER
MINITESTPRO
MINITESTBASE
Probe cable with test probe 8888
Adapter for earthing contact plug
to CEE coupling 3P+N+PE 32 A-6h
8 –––
Adapter for plug 1P+N+PE 16 A
to CEE coupling 3P+N+PE 32 A-6h
8 –––
Adapter for plug 3P+N+PE 16 A
to CEE coupling 3P+N+PE 32 A-6h
8 –––
Adapter for plug 1P+N+PE 32 A
to CEE coupling 3P+N+PE 32 A-6h
8 –––
USB connector cable 888 –
Operating instructions 8888