User manual

GMC-I Messtechnik GmbH 3

Ribbon cable with RS232 plug for connection of the SI module to the tester

2 USB socket connector for the transmission of stored data to the PC

LED signal lights up green when USB interface is active

provided the USB device driver has been installed to the connected PC

LED signal lights up green when RS232 interface is active

5 RS232 connection socket for PC, barcode reader or RFID scanner

6 Knurled screw

Signal LED, lights up briefly when connected with the test instrument and remains

deactivated afterwards

8 Clear key to delete single characters or

complete lines in connection with the shift key

9 Enter key to conclude the entry and go to the next entry prompt

10 Space key to enter spaces

11 Storage key to store the last test report

Shift key to shift the keyboard from small letters to capital letters and vice versa

Key shifts to full stop ( . )

Key shifts to underline ( _ )

13 Key to activate the SI module

14 Flap to fix the probe lead in the lid of the SECUTEST...

Combined keyboard instructions for report entry

(only for SECUTEST... test instrument)

  Deletes the line on which the cursor is positioned.

 All text entries are deleted,

provided the cursor is positioned in an active text entry section

+  The report stored last is deleted,

provided no SI module window is active.

+ A reset is done, the SI module is initialized, all stored data are

deleted!

This is only possible in the

Setup

menu under

Clear memory

ENTER

STORE