User manual

GMC-I Messtechnik GmbH 25
11 Maintenance
11.1 How to Reset the SI Module
Should the SI module no longer react, e.g. due to incorrect operation, it
must be initialized:
➭ Pull the line plug of the test instrument and restart it. Stored data are
preserved
or
➭ If stored data are to be deleted at the same time:
Select the Setup menu and then the menu item Clear memory.
Press + simultaneously.
Check the preset time after a reset!
11.2 Housing
No special maintenance is required for the housing. Keep outside sur-
faces clean. Use a slightly dampened cloth for cleaning. Avoid the use of
cleansers, abrasives or solvents.
11.3 Device Return and Environmentally Compatible Disposal
The instrument is a category 9 product (monitoring and control instru-
ment) in accordance with ElektroG (German Electrical and Electronic
Device Law). This device is subject to the RoHS directive.
We identify our electrical and electronic devices in accordance
with WEEE 2012/19/EU and ElektroG with the symbol shown to
the right per DIN EN 50419. These devices may not be dis-
posed with the trash. Please contact our service department regarding
the return of old devices, address see chap. 12.
If you use batteries or rechargeable batteries in your instrument or
accessories which no longer function properly, they must be duly dis-
posed of in compliance with the applicable national regulations.
Batteries or rechargeable batteries may contain harmful substances or
heavy metal such as lead (PB), cadmium (CD) or mercury (Hg).
They symbol shown to the right indicates that batteries or
rechargeable batteries may not be disposed of with the trash,
but must be delivered to collection points specially provided for
this purpose.
0
Pb Cd Hg