User manual

GMC-I Messtechnik GmbH 23

The 9-pin D-SUB connector for connection of the SI module to the

SECUTEST 0701S tester has the following pin assignment:

The 9-pin D-SUB connection socket for connection to PC, barcode reader,

etc., has the following pin assignment:

USB Interface

Type

USB 1.1

Operating voltage 5 V DC 10% from the RS232 interface of

the test instrument

Current consumption 40 mA typical

Baud rate 9600 bauds

Parity none

Data bits 8

Stop bit 1

Terminal assignment Type B 4 pin,

1: VCC, 2: D–, 3: D+, 4: GND

1: Enable remote control „Plus“

2: RXD

3: TXD

4: NC

5: GROUND

6: Enable remote contr. "GROUND"

7: NC

8: NC

9: +9 V

9876

1: NC

2: TXD

3: RXD

4: Switching input

5: GROUND

6: +5 V

7: CTS

8: RTS

9: NC

6789