User manual

18 GMC-I Messtechnik GmbH
The safety tests as well as the function tests can now be performed for
the selected class.
After the start of a report recording, the setting First or All in the statistics
menu can no longer be changed.
After each complete measurement, consting of safety test and function
test, the measured data must be stored so that they will be available for
statistic evaluation. See „How to Display and Store Reports“ on page 12.
If, after the measurement, First or All is followed by a symbol, statistic
data have been stored for the respective class.
All following measurements expand the statistics of the class activated at
the time by the additional measured results. If new statistic data are to
be recorded for an existing class, the stored statistic data can be
deleted, see chap. 6.3 Delete Statistic Data.
6.2 View Statistic Data
Select the Statistics menu to request statistic data:
➭ With or move the cursor to Display and confirm with , View
menu is shown.
➭ Select the class the statistic data of which you wish to see, confirm
with . The statistic data of the selected class are listed.
Moreover, in this mode you can browse through the statistic data of all
classes with the or keys.