User manual

GMC-I Messtechnik GmbH 15
5.3 Quick Report Storage
If many measurements are to be made successively and the results are
to be evaluated later, the function "Quick report storage" presents itself.
This function can only be performed after a test (safety test and/or func-
tion test).
➭ Activate the SI module with .
This brings you directly to the enter field for
the ident number. Here you can enter a
maximum of 24 digits and confirm with
.
➭ To store, press the key once more.
The report is stored in the data base of the SI
module together with all available data. Empty
data fields are ignored. At the same time you
return to measuring mode to immediately start
the next measurement.
Note
If a reset has been made accidentally after the test, e.g. by
changing the position of the function switch or pulling the inter-
face cable off, the ident number must again be entered in the
report. The data are preserved.
STORE
ENTER
STORE