User manual

10 GMC-I Messtechnik GmbH
Request menu
Press 1x
Selection and execution of the functions listed
in the menu is done by means of the corre-
sponding keys on the test instrument.
The other operating controls and connectors
should remain unchanged while the SI module
is active so that the data traffic will not be dis-
turbed.
The menu item "Return" causes a return to the LC display presented
prior to activating the SI module.
The display shows that 10 % of the storage capacity are already
occupied. When 99% of the memory are filled, the data should be trans-
mitted to a PC and stored there. Subsequently, the existing data must
be deleted before new data can be stored to memory. Otherwise, the
messages „Memory full“ and „Clear memory in setup“ appear.
4 Presettings
Upon selection of the menu item „Setup“
you can perform the following settings:
4.1 Setting the Clock
Note:
Please ensure that the same date and time are
set in the connected test instrument.
MENU
10%