User manual

4 GMC-I Messtechnik GmbH
Overview of Device Settings and Measuring Functions
Relative to Rotary Switch Setting
Scope of delivery:
1 Insulation and resistance measuring instrument
1 DAkkS calibration certificate
1 Set batteries (8 pieces in battery holder)
1Carrying strap
1 Alligator clip
1 KS17-4 cable set
1USB cable
1 Condensed operating instructions
1 Supplement Safety Information
– Detailed operating instructions for download from our website
at www.gossenmetrawatt.com
Battery level
Bar graph display
Measurement
Upper range limit
Measuring
Parameter
Display panel
Save
Battery full
Battery OK
Battery weak
Battery (nearly)
Battery Level Indicator
BAT
BAT
BAT
BAT
depleted U < 8.5 V
Measuring Status
Measurement in progress: Bars moves from left
Measurement on pause: Bars are static.
to right.
||||||||||
||||||||||
Polarity reversal‚
L-PE / N-PE for
documentation
setting
value
quantities
indicator
in progress
Memory Occupancy Display
MEM
Memory half full
MEM
Memory full > transfer data to PC!
These operating instructions describe a tester with
software version SW-VERSION (SW1) 01.02.00.
!
Switch
setting,
see as of
Picto-
graph
Device settings,
measuring functions
RISO
RINS
page 15
RINS Insulation resistance
U Voltage at the test probes
U
N
fix Fixed test voltage,
limit values per VDE 0100
Uvariable Variable test voltage, limit value:
1 MOhm (for go/no-go display
while saving the measured value)
Uramp Variable test voltage,
ramp: triggering/breakdown voltage
PI Polarization index
DAR Absorption index
kΩ
page 20
R Resistance measurement
RLO
page 21
RLO Low-resistance with polarity reversal
RLO+, RLO– Low-resistance, single-pole
R
OFFSET Offset resistance
V
page 14
U Voltage measurement
SETUP
page 8
Tests: LCD pixel display
LCD pixel display
All pixels off
Green limit LED All pixels on
Red limit LED Acoustic signal
Battery test Ubat
Date/time
CULT Language (D, GB)
Brightness
SET on: On-time for
LCD and tester
Contrast Default settings
Device type
Serial number
Software version
Hardware version
Calibration date
Adjustment date