User manual

GMC-I Messtechnik GmbH 37
13.5 Optional Accessories (not included)
Master Battery Pack (material no. Z502H)
8 LSD NiMH rechargeable batteries with reduced self-
discharging (AA) (eneloop/Sanyo), 2000 mAh with
sealed cells
Charger (material no. Z502R)
Broad-range charger for charging batteries in the mea-
suring instrument
Input: 100 to 240 V AC, output: 16.5 V DC, 0.6 A
IS0 Calibrator 1 (material no. M662A)
Calibration adapter for testing the accuracy of instru-
ments used for measuring insulation resistance and
low-resistance for test voltages of up to 1000 V (per
VDE 0413, parts 1, 2, 4 and 10).
KS-C (material no. Z541F)
Cable set consisting of measurement cable and
shielded high-resistance measurement cable for mea-
surements in the GΩ range
1081 Probe (material no. GTZ3196000R0001)
Triangular probe for floor measurements per EN 1081,
DIN VDE 0100-600 (standing surface insulation)
KS24 (material no. GTZ3201000R0001)
Cable set consisting of a 4 m long extension cable with
a permanently attached test probe at one end and a
contact protected socket at the other end, and 1 alli-
gator clip which can be plugged onto the test probe.
Test Probe for Remote Triggering
(material no. Z550A)
Optional plug-on measurement cable with a triggering
key on the test probe and an additional key for illumi-
nating the measuring point, including shielded, plug-in
connector cable.
Barcode-Profiscanner-RS232
(material no. Z502F)
Barcode scanner for RS 232 connection (laser sen-
sor), variable barcode length, enhanced reading accu-
racy, with coil cable
Barcodeleser B3261
(material no. GTZ3261000R0001)
Barcode scanner for RS 232 connection (LED sensor)
SCANBASE RFID
(material no. Z751G)
RFID read/write for RS 232 port
(13.56 MHz)