User manual

26 GMC-I Messtechnik GmbH
Select a new object from a list.
Select the desired object from the list with the ↑↓ keys and
acknowledge with the ↵ key.
Enter a designation (Example Distributor).
Enter a designation and then acknowledge it by entering a ✓.
10.3.2 Searching for Structural Elements
Mark the structural element from which the search will be started.
Objects located underneath or next to this object will be included
in the search.
Go to page 3/3 in the database menu.
After selecting text search ...
... and entering the desired text (only full matches are found – no
wild cards, case sensitive) ...
... the first match is displayed.
Further matches can be found by selecting the icon shown
at the right.
If no further matches are found, the message shown above is dis-
played.
Scroll up
Scroll down
Acknowledge selection
Select character
Select character
↵ Accept character
Delete characters
Character selection:
✓ Save object designation
A, a, 0, @
Scroll up
Scroll down
Acknowledge selection /
Display object
Menu selection → page 3/3
change level
or ID number
Search for ID number
Search for text
Search for ID number or text
Select character
Select character
↵ Accept character
Delete characters
Character selection:
✓ Save object designation
Continue searching
Search for ID number
Search for text
Search for ID number or text
Search for ID number
Search for text
End search
Search for ID number or text