User manual

GMC-I Messtechnik GmbH 25
Distributor Structure Symbology / Tree Structure
10.3.1 Creating Structures (example for electrical circuit)
After selection with the MEM key, all setting options for the cre-
ation of a tree structure are made available on three menu pages
(1/3, 2/3 and 3/3). The tree structure consists of structural ele-
ments, referred to below as objects.
Select the position at which a new object will be added.
Use the ↑↓ keys in order to select structural elements.
Change to the sub-level with the ↵ key.
Go to the next page with the >> key.
Create a new object.
Press the key in order to create a new object.
Edit the selected structural element.
Memory menu, page 3 of 3
Search for ID number.
> Enter complete ID number.
Search for text.
> Enter full text (complete word).
Search for ID number or text.
Continue searching.
Edit menu
Cursor left:
Select an alphanumeric character.
Cursor right:
Select an alphanumeric character.
ENTER: Accept an individual character.
←
→
Acknowledge entry
Cursor left
Cursor right
Delete characters.
Switching amongst different types of alphanu-
meric characters:
A Upper case letters
a Lower case letters
0Numbers
@ Special characters
Icon Meaning
Distributor
A check mark to the right of a structural element means that all measurements
within the respective hierarchy have been passed.
x: At least one measurement has not been passed.
No symbol: Measurement has not yet been performed.
Building
Customer
Same type of element as in the Windows Explorer:
+: Sub-object available, display by pressing ↵.
–: Sub-objects are displayed, hide by pressing ↵.
Scroll up
Scroll down
Acknowledge selection /
Display object
Next page
change level
or ID number
Create object
Delete object
VΩA: show measurement data
Edit designation