User manual

20 GMC-I Messtechnik GmbH

8 Measuring Resistance – kOhm Function

Resistances of greater than 10 Ω and less than 10 kΩ are mea-

sured in this switch position. Refer to section 9 regarding resis-

tances of less than 10 Ω .

Select Measuring Function

➭ Select the kΩ measuring function with the rotary switch.

Connection

➭ Connect the device under test to the + and COM jacks.

Attention!

Resistance can only be measured at voltage-free ob-

jects. If mains voltage or interference voltage is applied to

the measurement inputs, measurement cannot be

started.

Start Measurement

➭ Start an individual measurement by briefly pressing the START

key, or initiate continuous measurement by briefly pressing

the CONTIN key.

Special Case: Measuring High-Value Resistance with the KS-C Probe

Connection

➭ Connect the device under test to the + and COM jacks with a

shielded cable via the optional KS-C probe.

kΩ

START

CONTIN

Connector with

Shielded Cable,

Option KS-C (Z541F)

Shielded

Cable