User manual

10 GMC-I Messtechnik GmbH

Significance of Individual Parameters

Test Instrument On-Time

The period of time after which the test instrument is automatically

shut off can be selected here. This selection has a considerable

influence on the service life and the charging status of the batter-

ies.

On-Time for LCD Illumination

The period of time after which LCD illumination is automatically

shut off can be selected here. This selection has a considerable

influence on the service life and the charging status of the batter-

ies.

Submenu: Battery Level Query

Battery voltage U

BAT

(Uo) can be queried here without subjecting

the battery to a load.

Note

Measuring Sequence

If battery voltage drops to below 8.0 V

during the course of a measuring

sequence, this is only indicated by

means of a pop-up window. Measured

values are invalid. Measurement results cannot be saved

to memory.

➭ Press ESC in order to return to the main menu.

Attention!

Data are lost when the language

is changed, or if the instrument is

reset to its default settings!

Back up your measurement

data to a PC with the help of

ETC software before press-

ing the respective key.

The prompt window shown at

the right asks you to confirm

deletion.

User Interface Language (CULTURE)

➭ Select the desired language with the appropriate country

code and acknowledge your selection by pressing the ✓ key.

Default Settings (GOME SETTING)

The test instrument is returned to its original default settings when

this key is activated.

Firmware Revision and Calibration Information (example)

➭ Press any key in order to return to the main menu.